Privacy (Routeless) Feature ----> Price based on size
Reduce light and ensure privacy by ordering your blinds with our Routeless Construction feature which places the route holes towards the back of the slats so when completely closed you eliminate the incoming light typical of standard routed horizontal blinds.

• Minimum Width: 8"
• Maximum Width (single blind): 72"
• Minimum Height: 12"
• Maximum Height: 120"
• Minimum Shallow Mount Sill Depth: 1-1/8"
• Minimum Flush Mount Sill Depth: 3"
• Min. surface area for Outside Mount: 2-1/4".
• Routeless slats are less secure in the ladders than slats with lift cords running through the route holes. Slats may shift when blinds are lifted or tilted and may not settle back into position without adjustment. Handle with care.
• Faux Wood Blinds are approximately 80% heavier than Basswood Blinds. The slats are very flexible and require additional support with closer ladder spacing and shorter end-routes.

• Inside mount blinds – headrail and slats made 1/2" smaller than width ordered. Valance will be an 1/8" of an inch less than ordered width
• Outside mount blinds – headrail and slats made to exact width ordered. Valance will be 2" wider than ordered width

• Blinds less than 13.375" wide will have center wand tilter only - no lift control
  
  Blinds 13.5" wide to 20" must have split controls i.e. tilt left and lift right

• Mounting brackets are hinged, open boxes that can mount from the side, top or back of the window.