Reinforced engineered stile
A well-crafted shutter closes solidly, does not have light gaps, and stays that way year in and year out. To accomplish this, each part of the shutter must resist twisting, bowing, cupping and all other forms of instability.

Norman's is the only shutter manufacturer to compensate this tendency to deform, by using reinforced engineered wood. We employ a procedure that bonds multiple layers of wood together with pressure, heat, and a proprietary chemical formulation. This imparts an intense level of stability to the cores of our stiles and results in a robust support system for your shutter panels. This is a more costly process compared to using a solid piece of wood, but Norman's doesn't believe that stability should be compromised at any cost.

To inhibit deformation, bonding multiple layers of wood together with pressure, heat, and a proprietary chemical formulation creates the core of Norman Shutters’ engineered, reinforced stile.

Enlarge the two pictures below - the picture on the left doesn't have astragal molding - see the light gap in the center where the two panels meet? The picture on the right has astragal molding - no light gap.

Without
Astragal Molding

With
Astragal Molding

A Solid Composite Wood Core
Solid core and thick louvers prevent problems associated with hollow shutters. Withstands temps over 140 F without warping. Reduced environmental impact (does not utilize/impact old-growth forests or harmful chemicals)

Our tension rod system runs the entire width of the shutter panel through the louvers. This prevents stripping of the tension screw, and cracking of the louver and ensures a tight closure. Streamlined appearance. Stainless steel fasteners - Limit corrosion and resist loosening.

We also help homeowners avoid one of the most bothersome experiences of shutter ownership: staple failure. Staples that hold the tilt rod to the louvers can become dislodged over time. Our product engineers designed a system that we’re so proud of that we guarantee it will never disappoint.

Norman Shutters uses stainless steel staples that are longer than the industry standard, affixed with friction-actuated glue.

• Master craftsmanship - Each shutter is custom hand crafted based on a 30-year tradition by the world's largest manufacturer of window coverings
• A wide range of frames with inserts which keep installation screws out of sight for a clean and decorative look to match your style and preference.
• Furniture-quality finish - Classic finishes harmonize brilliantly. R-Value of 4.63 - Energy efficient

• UV inhibitor protects your shutter and home decor from UV rays and prevents color fading and damage from the sun.
• Enjoy swift and easy on-site installation with the pre-installed magnets and hinges, as well as pre-mitered frames and slotted keyholes.
• A guarantee of Norman Shutters’ exemplary quality with a lifetime limited warranty on materials and workmanship.

• Measure diagonally with a metal measuring tape
• Should the difference between the two diagonal measurement be greater than 1/4" Outside Mount is highly recommended.

• Shutters will fit inside a window opening. There must be enough unobstructed depth on the mounting surface inside the window opening.

• Shutters will fit inside a window opening. There must be sufficient flat mounting surface around the window opening.

Frame Styles & Width

• 2" Camber Deco: 2-5/8"
• Beaded L-Frame: 1-1/2"

Window Size (WS)
Windows Size measures both width and height of the Window from inside the window area. (See
Diagram above).

Max Frame to Frame (MFF)
Max Frame to Frame Size measures both width and height of the shutters including shutter frames. The width of the available frames are listed above.

Example: Your window size is 30" x 60" - you want a four-sided Beaded L-Frame - here's the math:

Width: 30" + 1-1/2" (Left) + 1-1/2" (Right) = 33"
Height: 60" + 1-1/2" (Top) + 1-1/2" (Bottom) = 63"

The MFF measurement = 33" x x63"